Clover Electronics CDR1650 Manual do Utilizador Página 167

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 178
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 166
9. Installation of additional HDDs
167
9-2. Installation of an additional HDD
Set the jumper setting to “Cable Select” position on the additional HDD.
Note: Be sure that the jumper setting is correct. If not, the system will not
recognize the additional HDD.
Turn off the power. Unscrew and remove the cover.
Install the additional HDD in the space as shown in Fig.9-1.
Connect the power connector and the flat cable to the HDD.
Reassemble the cover.
Turn on the system and confirm that the system recognizes the additional HDD. If the
system fails to recognize the HDD, check the correct jumper settings and secure cable
connections.
Note: After installing the additional HDD, formatting on the new drive should be
performed. Refer to section 7-3.3. for more details.
Vista de página 166
1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 177 178

Comentários a estes Manuais

Sem comentários